How To Use An Eyce Hammer

How To Use An Eyce Hammer

 

What is the Eyce Hammer pipe?

The Eyce Hammer is our version of a silicone bubbler. A bubbler is a hybrid of a water pipe and a hand pipe - featuring a water chamber and an elongated mouthpiece. Like the Eyce Hammer, bubblers tend to be smaller in size and require less water than larger water pipes making them a convenient portable alternative.

How to fill your Hammer, aka bubbler pipe?

Eyce Hammer - Bubbler Ice Chamber

When using a bubbler, you first want to add water. But with the Eyce Hammer, we provide you the added bonus of the ice chamber. If you’d like to create a smoother, cooler session; we recommend utilizing this feature. To do so, fill the lip in the front of the water chamber, place the lid back on the chamber, and allow the Hammer to sit in your freezer for a couple of hours. It’s that simple. 

Filling Water Chamber Of Eyce HammerOnce frozen, you’re ready to add water to your Eyce Hammer water pipe. To add water, pull the lid of the top of the water chamber. Fill the chamber roughly halfway, or with 1 tablespoon of water. Place the cap back over the chamber, ensuring a snug fit. 


How to smoke with your Eyce Hammer?

Preparing To Use Your Silicone Bubbler

Once it’s filled with water, it’s time to load your glass bowl. To load your bowl, you can place a chunk of material into your bowl - or ideally, for a more consistent burn, grind your material up using a grinder before loading. When packing your Hammer/bubbler pipe, you don’t want to pack the bowl too tight. You want to ensure that oxygen can still flow through to ignite the material.

Using Silicone Bubbler While Covering The CarbNow you’re ready to light up. Hold your Eyce Hammer, or silicone bubbler, in one hand so that your finger is covering the carb, located on the side of the water chamber. Press your lips to the end of the mouthpiece while positioning the lighter above the bowl. Simultaneously ignite the material while inhaling through the mouthpiece.

Releasing The Carb To Complete The Inhale

Once the water chamber has filled with smoke, lift your finger from the carb (hole), while continuing to draw. This should release smoke through the elongated neck at a faster rate. Repeat steps until satisfied.



Cleaning your Eyce Hammer

Cleaning Silicone Bubbler - Eyce Hammer

Cleaning your silicone bubbler is just as easy as using it. Start by clearing out any solid materials from the glass bowl using a cotton swab or your steel poker, provided with every Eyce Hammer. After removing solid material, remove the cap from the body and the bowl from the cap. Clean the glass bowl separately. Apply some Eyce Silicone Cleaner to the silicone cap and body of the Eyce Hammer. Allow pieces to soak for 5 minutes and then scrub to get any stuck-on grime. Using old toothbrushes and cotton swabs are great for stuck-on dirt or hard to reach spots. After scrubbing, rinse your silicone bubbler water pipe thoroughly, and let dry.

Our unique portable silicone bubbler, the Eyce Hammer, is ready for yet another epic adventure.

Back to blog