Eyce Molds Silicone Smoking Spoon Pipe

How To Use The Eyce Spoon

 

What is a spoon pipe? 

A spoon pipe is one of the most common types of smoking pipes. It’s often the first pipe many smokers purchase when creating their collection. The Eyce Spoon consists of the glass bowl (where the plant material will go), a carb (allowing you to control the level of smoke that builds up in the chamber), a stem, and a mouthpiece. 

How to fill your Eyce Spoon? 

Silicone Smoking PipeThe first step to using your silicone spoon pipe is packing the bowl with dry plant material. Impatient smokers tend to stuff the glass bowl with a chunk of material. But, for a smooth, even burning experience, we recommend breaking down the plant material with a grinder prior to packing the glass bowl. 

When filling the bowl, make sure not to pack the dry material too tightly or too loosely. Ideally, the bowl should be packed tightly enough to keep the material together, but loose enough to allow airflow.

 

How to smoke your Eyce Spoon pipe? 

Finger On CarbWhen you’re ready to use your unbreakable smoking pipe, place your finger over the carb. The carb is the hole on the side of the pipe, next to the glass bowl. Make sure you’re holding the pipe in a way that will allow you to remove your finger from the carb while smoking.


Time to put fire to your material. Using a lighter, ignite the plant material in your bowl while simultaneously inhaling through the mouthpiece. If you don’t inhale while lighting you run the risk of burning your finger and not the plant material.

How To Use Carb

When using a silicone spoon pipe, you should not have to inhale too hard. If it’s your first time using a pipe, be sure to take a light and easy drag; to get a feel for the Eyce Spoon. As you inhale, the pipe itself fills with smoke. To release the smoke, simply remove your one finger from the carb while continuously completing your inhale. Once the carb is "open", smoke will rush into your lungs much quicker than when the carb was covered. You may want to inhale slower once you “open” the carb. Repeat this process until you are satisfied, or the plant material has burnt out.

 

How to clean your Eyce Spoon? 

Cleaning Silicone SpoonCleaning your silicone spoon pipe is just as easy as using it. Start by clearing out any solid materials from the glass bowl or silicone body using the accompanying steel poker (comes with every Eyce Spoon pipe). After removing solid material, pop the glass bowl from the body of the spoon pipe. You should clean the glass component separately. Apply Eyce Silicone Cleaner to the body of your product. Allow to soak for 5 minutes and then scrub with an old toothbrush to get any stuck-on grime. After scrubbing, rinse your unbreakable smoking pipe thoroughly and let dry, until another use.